1. Pay and Display via QR
Entry or bay QR codes link to a payment page pre-filled with the bay number and tariff. The driver pays on their phone, and the system logs the paid session against the vehicle or bay.2. Digital Permit Display
Season permit holders display a QR code on a card in the windscreen. Enforcement officers scan to verify current permit status in real time, replacing physical sticker permits.3. Dispute Resolution
A scan log with timestamp and location provides evidence in any dispute about payment or parking time. The system knows exactly when each code was scanned.4. Security
See the parking scam article for defence against sticker overlays. Use tamper-evident holders or integrate the code into the signage surface.Putting this into practice
Start with the smallest real test you can run. Generate the code, print it at the exact size you plan to use, and scan it with two different phones in the lighting where it will live. Check that the destination page loads quickly on a mobile connection and that the call to action next to the code tells people what they will get. If anything feels slow or unclear, fix it before you print a full batch, because reprints cost more than a short test. Keep a note of the size, material, and placement that worked so the next batch starts from a proven setup.Common mistakes to avoid
The most common mistakes are easy to avoid once you know them. Long payloads make modules tiny, low contrast makes edges hard to read, and text placed too close to the border eats the quiet zone the scanner needs. Covering a corner finder pattern with a logo or a sticker breaks detection entirely, and a code placed behind glare or on a curved surface fails even when the print is perfect. Review each of these points on a proof copy, and treat any failure as a reason to adjust the design rather than a reason to blame the scanner.Quick checklist
- Keep the payload as short as practical so modules stay large. - Keep dark modules on a light background with strong contrast. - Leave a clear quiet zone on all four sides of the symbol. - Test the printed code at the real viewing distance and lighting. - Confirm the destination page loads fast on a phone. - Recheck the code after any change to the link, design, or placement.Codes that stay in circulation need occasional attention. Links change, pages move, and printed materials fade, so review each live code on a regular schedule and confirm it still opens the right destination. When a destination changes, update a dynamic code or reprint a static one on the same day, and remove old codes from circulation so nobody scans a dead link. Keep a simple register of where each code appears, what it points to, and when it was last tested, because a code nobody owns is a code nobody fixes.